Best Cooler For Camping 2018-Do NOT Buy Before Reading This!
When summer comes, it is an open season to go out. However, basking in the heat takes a tall, and everyone craves for a cold refreshment. It becomes quite a struggle trying to keep your cold drinks from home cool for more extended periods in such an environment. However, with a cooler box, you all set.
A cooler has an insulation interior that enables it to keep its interior temperature cold. It ensures you of a cold refreshing drink after a long hot day.
The ability to keep cool without power while you out makes the cooler a must-have item for your trips. When it comes to making such a purchase, it is critical to ensure that you get the best cooler for camping.
There are many coolers from different brands, and it can be a pickle in the jar trying to choose from the list without being privy to some information forehand. Below are some products features and tips that I believe are a revelation and you should pay close attention to while doing your research on the item. They include:
Best Camping Coolers Comparison
Thrive Leads Shortcode could not be rendered, please check it in Thrive Leads Section!
10 Best Cooler For Camping Review.
- Rugged one piece rotationally molded construction with textured top lid and soft damage...
- Thick urethane insulation keeps ice for 5+ days, the same retention performance as Yeti...
- Freezer grade lid seal with vacuum release button to prevent stuck lids
A white cooler measuring 26.1” by 17.4”, 17”, and weighs in at 29.9 pounds. It gives it an excellent weight to volume ratio, which makes it easy to carry around and store.
It also features thick urethane insulation capable of keeping ice for more than five days. The cooler box is roto-molded as a single piece, which gives it a seamless, durable exterior. It also comes with easy to open and close latches and a vacuum release button that comes in handy during the opening.
It also features a drain for draining out any melted ice water, and its cap is leased with stainless steel for safekeeping. It has strong feet and tie-down slots for use during transport.
Other accessories include a cutting board separator, a stainless steel bottle opener and a drink holder, which acts as an extension to the top that doubles as a table or seat.
Advantages
Disadvantages
Verdict: The product ticks all the boxes in matters performance as it gives a 5-day ice retention period, which is astounding. It also features a rugged exterior that guarantees long life service, making it the best overall model pick.
- This rolling cooler has extra thick insulation that keeps ice frozen up to 5 days even in...
- Large size accommodates up to 130 cans plus ice; The rugged wheels make maneuvering this...
- Portable cooler is great for camping, picnics, tailgating, or any party
The blue ice chest is made of durable metal exterior and padded with thick interior insulation capable of keeping ice up to 6 days.
It also has wheels fitted and a plastic tow handle, which makes it easy to move around with. It features an easy to clean liner that has microbial protection keeping your cargo aseptic.
It also features two hinged doors for easy access without letting the cold air out. Its lid top doubles as a table and has molded cup holders that come in handy while you out in the open camping.
Advantages
Disadvantages
Verdict: Which the wheels as an added feature to the excellent ice retention period; the Rubbermaid Extreme ice chest is the best cooler to buy on a budget.
- VOLUME: True 50 quart internal volume
- EXTREME ICE RETENTION: 2 inches of polyurethane insulation with a 360 degree freezer-grade...
- FEATURES: Overmolded carry handle, 3 inch locking latches, reinforced lockable hasp,...
The cooler box measures 30”, 20.3” by 20.4” and weighs in at 31 pounds, which makes it light and easy to handle. It comes in with a range of eight colors to suit your preferences.
Its body and handles are made of polypropylene, 3” locking latches and the accessories out stainless steel such as a bottle opener that make it rugged and durable.
It can hold ice for up to ten days, thanks to its 2” thick insulation and an all-around the brim seal that ensures the box is airtight on closing. Equipped with a drain cap, it becomes easy to drain melted ice.
Advantages
Disadvantages
Verdict : With additional features such as the cup holders, drain caps and accessories, it makes the pelican elite the best buy.
- The YETI Tundra 65 is just as adept at keeping your catches cold in the field as it is...
- Ice stays ice thanks to up to 3 inches of PermaFrost Insulation and an extra thick FatWall...
- The Rotomolded Construction makes the Tundra armored to the core and virtually...
The cooler measures 16”, 30 1/2”, 17 1/2”, and weighs 29 pounds making the lightest coolers and one of the available on the market. Its roto-molded exterior gives it a hard, durable outside that is virtually indestructible.
The interior has 3” of pressure injected polyurethane foam that provides permafrost insulation to keep the ice for over 6 hours.
It features a two-hinge pin interlocking design, T-Rex lid quick close and releases latches and an all-around brim seal complemented by an interlocking cover to the bottom part to ensure an airtight lock when closed.
It has drain cap at the base and is fitted with non-slip feet and anchor points for fastening during transit. It is installed with easy to handle side-grips and has extendable military-grade polyester rope handles too for two people to carry.
Advantages
Disadvantages
Verdict: The brand has an exceptional reputation in the market, and so does the YETI Tundra cooler. It has a great review and proven service life you can be sure to rely on. It is the editor’s choice.
- Roto molded construction
- Integrated insulation
- Lid gasket for perfect seal
The cooler by ORAC measures 18.5”, 12.3” by 13.4” and weighs 33 pounds when empty. The exterior casing is roto-molded offering a rugged and durable housing.
It has integrated insulation wall made of foam, which improves its ice retention over a longer period. It employs the use of T-Rex latches for closure.
It also has a top handle for easy handling and non-slip rubber feet for a proper grip on the surfaces placed on. It also comes in a variant of colors and different volumes sizes to choose from.
Advantages
Disadvantages
Verdict: The ORAC offers a durable cooler with a cleaver T-Rex latching mechanisms that make it easy for locking and closing. In addition to its lengthy ice retention period, it comes as the first runners-up to the other two coolers.
- Best in class ice retention and overall performance, holds ice for up to 10 days
- Rotationally molded with 2 inches of high density closed-cell polyurethane insulation all...
- IGBC Certified bear resistant container - when 2 locks used
Weighing in at 11.38 pound, it is the lightest cooler of the ten. It is of roto-molded construction that offers structural surface strength.
It has a 2” thick polyurethane foam that insulates against heat loss and gives an ice retention period of up to ten days. It also features a silicone seal, and marine grade compression latches for an airtight lock.
It also fitted with side handles and extendable ropes for to people to carry around. It also comes in different colors and volume sizes.
Advantages
Disadvantages
Verdict: It is the lightest cooler on the entire list and with an IGBC certification and an extended 10-day ice retention period; it makes one of our top ten coolers.
- The YETI Tundra 65 is just as adept at keeping your catches cold in the field as it is...
- Ice stays ice thanks to up to 3 inches of PermaFrost Insulation and an extra thick FatWall...
- The Rotomolded Construction makes the Tundra armored to the core and virtually...
A desert tan colored cooler that measures 30.5”, 17.5” by 16” and weighs in at 27.3 pounds. Its exterior is made by rotation molding that makes it seamless which gives it structural strength and makes it durable.
The exterior is IGBC certified as bear resistant. Its insulation is made of 3” polyurethane foam that can keep the ice for more six days.
It also features T-Rex lid latches made from industrial grade rubber for sturdy firm closure. Its closure system features a durable two-hinge system, a freeze-free seal gasket on the lid and an interlocking mechanism between the top and the bottom that is foolproof of any leakages.
It has two types of side handles for different handling situations. It also has a vortex drain system that is leakproof.
Advantages
Disadvantages
Verdict: The YETI Tundra has ice retention of 6 days thanks to its 3” thick insulation and features elaborate locking system that allows for easy access making it among the best coolers available.
- Rotomolded: Our coolers are made from rotationally-molded LLDPE plastic and are designed...
- Thermal Properties: All hard-sided coolers are pressure injected with up to two inches of...
- Lid Gasket: Our lids seal with a rubber gasket to keep cold air trapped extending the...
The grizzly cooler measures 18”, 33.2” by 18” and weighs in at 33 pounds. It is made of a damage-resistant exterior and interior and a two-inch thick insulating foam.
It also features a 2” drain and a cap at the bottom. Its lid has an airtight rubber gasket to ensure no leakages on closure. It has a locked by a 3-latch system that is firm and durable. It also has non-skid rubber feet and can hold up to 960 oz. in volume.
Advantages
Disadvantages
Verdict: It has excellent performance outweighs the fact that it is one of the most massive coolers. It has good ice retention that gives it a spot on our top ten list.
- Keeps ice up to 5 days at temps up to 90°F thanks to an insulated lid and extra...
- Holds 100 cans and has molded cup holders on top of lid to keep drinks close and prevent...
- Leak-resistant channel drain lets you remove excess water without tilting cooler
The Coleman cooler measures in at 29”, 15.8”, and 18.2” and weighs in at 14.2 pounds. It offers a volume of 70 quart, which is equivalent to 100 standard cans.
It uses Xtreme insulation technology which as ice retention of 5 days. It also has a leak-proof drain channel, and comfortable grip handles.
It also features an easy to clean lead and has cup holders molded in the top lid. It also comes in a variant of colors for you to choose from.
Advantages
Disadvantages
Verdict: The Coleman cooler gives the essentials requirements of cooler and has additional features such a seat or table top for use. It is a good buy for those looking for functionality on a budget.
- Keeps Ice up to 10 Days, Like a portable freezer
- Integrated Locking System, Bear Resistant
- Easy-Flow Drain Spouts, Lets the water out, keeps ice in
The cooler measures 26.5”, 16.5”, and 16” and weighs in at 25 pounds, which is within the average of the rest. It has thick insulation that can keep ice up to 5 days.
The exterior is made of durable material that is impact resistant. It features a 2-latch closure system with the top lid lined with a rubber gasket to make it airtight.
It has rubber feet to avoid skidding on the surface and has handles and provisions to for fastening while transporting it. It also has accessories such as a cutting board, and its top lid can double up as tabletop or seat.
Advantages
Disadvantages
Verdict: It offers basic functionalities of the cooler chest on a budget. It is a good buy for anyone looking for the essential features on a budget too.
Conclusion
We all plan camping to go and have fun outdoors. The cooler is one of the essentials during packing sometimes comes in handy. With accessories such as the bottle opens, provisions for cup holders and the tops doubling up as a tabletop or seat, it becomes a mandatory necessity.
With this information, I trust you will be able to make an informed choice between the above-ranked coolers.
Last update on 2021-01-23 at 08:29 / Affiliate links / Images from Amazon Product Advertising API
